Blog

Engineered Wood Flooring

Engineered Wood Flooringengineered wood flooring

What to Look for

Three Common Classes of Engineered Wood Flooring Boards

Good, better, best
Engineered flooring runs the gamut from the low end, starting at $3 per square foot, to the high, at $14 and more. To judge quality, check the thickness of the “wear layer,” or top skin of wood; the number of veneers in the core; and the number of finish coats—all of which affect price and warranty. Typically, the more layers, the better. Below, see how the three common classes of engineered boards stack up.

Good: 3-ply construction; 1-2 mm wear layer; 5 finish coats; 10- to 15-year warranty; ¼ inch thick; About $3-$5 per sq. ft.; Options limited to common species, such as oak or ash, and just a few stains.

Better: 5 plys; 2-3 mm wear layer; 7 finish coats; 15- to 25-year warranty; ¼ inch thick; About $6-$9 per sq. ft.; More species, such as cherry, beech, and some exotics; all stains and a few surface effects, such as distressing.

Best: 7-9 plys or more; 3 mm-plus wear layer, which can be sanded two or more times; 9 finish coats; 25-year-plus warranty; 5/8 to ¾ inch thick; About $10-$14 per sq. ft.; Widest selection of species; reclaimed options; and more surface treatments, such as hand scraped and wire brushed.

Why Hardness Matters

The harder the top layer, the more resilient it is to dents and the longer it’ll keep its like-new looks. But hardness isn’t the only factor to consider. Dense woods with less grain, like maple, show dings more readily than a slightly softer wood with a bold grain, like red oak. And floors with little or no gloss are better at hiding scratches and wear. The chart below compares the hardness of popular wood species.

https://www.thisoldhouse.com/ideas/all-about-engineered-wood-floors

About the Author

Patty FilasPatricia Daly Filas Award Winning Designer, Nationally Published, Featured on Home and Garden Television, Featured Guest Speaker, Member National Kitchen and Bath Association, Certified Kitchen Designer, (CKD), Historic Showhouse Designer, Licensed General Contractor, Member NKBAView all posts by Patty Filas →

Leave a Reply

Happy Remodeling!

Contact Your Squarefeet for Kitchen Design, Kitchen Remodeling, Project Planning, Construction, Contract Review and much more...